Monkey Grip Retractable Ratchet Tie Down 1.5m-4m

Monkey Grip Ratchet Tie Downs Don't Let Go!

• Monkey Grip Ratchet Tie Down Ratchet Systems are a must have addition to owning any trailer, ute or transporting vehicle. Designed with large lashing capacities, they are perfect for travel and securing heavy duty cargo.

• Webbing tie downs are now widely used in the transport industry. Webbing Tie Downs are light-weight, easy to handle and easy to use. Webbing lashings are more elastic than chains therefore they retain more tension & cause less damage to cargo or paintwork.

• Avoid fines and safely cover your load! Fines of up to $5,000 for individuals or $25,000 for business for unsecured loads and possibly further legal action! 

Features

Smart Retractable Ratchet Tie Down System

• Retractable straps have a convenient ratcheting mechanism and easy-to-use hooks on each end; Bolt-On Design: Allows you to mount the straps directly to your trailer, truck bed, or ute tray. The strap will automatically retract back into the in built storage case the tie down mechanism, no more annoying lose ends to tie up!

Rubber Handle Ratchet Mechanism & Hooks

• The ratchet mechanism handles & S-Hooks on these Monkey Grip Ratchet Tie-Downs have a durable rubber coating. This makes using the ratchet mechanism super easy on the hand whilst providing a ergonomic grip. The rubber coating also increases the grip strength of the S-Hooks whilst preventing scratching. 
  
• Features a red button locking mechanism that allows you to easily pull through as much strap length as you require.

Professional & Safe

• Monkey Grip Ratchet Tie Downs are designed, manufactured, & tested to Conform to AS/NZ 4380 Australian Standard. 

Product Details: 
ARTD2515-1

Product Details:

ARTD2540-1

Product Details:

ARTD3840-1

Product Details:

ARTD5040-1

How to use Monkey Grip Retractable Tie Down's

1. Press and hold the release button in and lower the handle down as far as it goes.
2. The strap can now be pulled out around the load and the fittings connected to solid anchor points.
3. Pull the release button and place the handle in the upright position.
4. Let go of the release button and tighten the strap by ratcheting the handle.
5. A minimum of 2 full wraps around the strap reel is recommended for safety to secure the load and so the tie down can function correctly. 
6. To lock, leave the handle in the lock position
7. To release, simply push the release button again and push the handle completely closed. 

Monkey Grip Safety Information

WARNING: DO NOT EXCEED LASHING CAPACITY (Shown in kilograms (KG) on the front of each pack)

Key Information 

• Selection & Use: Consideration should be given to the required lashing capacity (LC), taking into account the mode of use & nature of the load to be secured. The lashings should be suitably pre-tensioned and regularly checked during the journey.

• Material: This strap is made from Polyester (PES) and is NOT resistant to chemical attack. Effects of chemicals may increase with rising temperature casing the restraint to fail. If there is any contact / contamination from chemical products, a web lashing should be removed from service and disposed of.

• Operating Temperatures: The webbing restraint system complying with the standard is suitable for use in the following temperature range; (minus) - 40°C to 100°C. These ranges may vary in a chemical environment. Changes in environment temperature during transport may affect the force in the webbing. The tension force should be checked after entering warm areas.

• Protection & Limit of Twist: The webbing restraint system should be protected against friction, abrasion and damage from loads with edge radius less than twice the webbing material thickness, using protective sleeves or corner protectors. Webbing restraint should not be used when knotted,

• Storage & Maintenance: If the webbing strap becomes saturated in use, dry in a shaded area prior to storing. It is advisable to lubricate the ratchet mechanism with a small mount of lubricant. When not in use, store in a dry location. 

Meanings relating to a webbing restraint system:

• Lashing Capacity (LC): Commonly referred to as LC, the lashing capacity is half of the minimum breaking strength of the system which is designed to sustain in use in straight pull expressed in kilograms (kg or kgs) rather than kilogram force. 

• Fixed End Length (Lgf): This is the webbing end with tensioning device, a fixed end length

• Adjustable End Length (Lgl): This is the length of webbing without the tensioning device, an adjustable end length.

• Hook & Keeper / S Hook / Carabiner Hook: This refers to the end fittings used on the restraint system.